APPLICATION Recommended for transportation of agricultural and industrial bulk commodities.

1. KINGPIN SETTING 20”- Twin 1/4” steel bolsters with 1/4” steel full-width pickup plate.

2. SIDE PANELS Pre-painted white .048” and .063” aluminum, corrugated on 4” centers. Lower Rails-Aluminum 7-11/16” high extrusion. Side Posts- Aluminum extrusion 1-3/4” Z-posts on 12” centers. Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. Interior Lining-.048” aluminum.

3. REAR PANELS Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts.

4,5,6. STEP, LADDER & HANDHOLD Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder.

7. NOSE PANELS Smooth pre-painted white .063” aluminum.

8. FRONT CORNERS 6” radius, mill finish aluminum (color optional).

9,10,11 LIGHTS & WIRING Side Lamps - Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.d. mid turn/marker lamp. Nose Lamps - (2) High mounted amber L.E.D. lamps. Standard High mounted Rear Frame Lamps - (5) red L.E.D. marker lamps on rear header. Rear Tail Lamps- (6)-4” diameter, 7 diode L.E.D. lamps, flange mounted. Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground. Conspicuity Tape: Red and white reflective tape mounted in line with bottom row of side marker lamps and full width across rear of trailer. White reflective tape mounted on top corners of rear frame. (All lamps and wiring comply with FMVSS 108)

12. SUPPORT LEGS Square legs, with roadside removable crank, low-profile 10" diameter cushion foot shoe,
50,000 lbs. lift capacity. Located 88 5/8” from Kingpin on 28’6” & 94” on 33’5”.

13. HOPPERS Two piece .125” aluminum formed tubs with 35.8 degree side slopes and 33 degree end slopes, high ground clearance. End slope panels-.080” aluminum supported by aluminum channel with Z shaped member. Divider Panel - .080 aluminum.

14. TRAPS 24"W x 22”L openings. The trap plates are 1/4” aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. 102” wide trailers Add 6” to trap opening width. Hopper clearance 25” .

15. TRAP OPERATORS Each trap is opened and closed by a manually operated 1" diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank. There are trap locks at each crankshaft. The double rack and pinion gears drive at both sides of each trap plate.

16. SUSPENSION CB2300 Neway suspension, 17” ride height with 23,000 lbs rating welded to the 5” round axle. Suspension subframe beams are 4” x 8” x 3/16” rectangular steel tubing.

17. AXLES Meritor 22,500 lbs. beam capacity, 5” diameter, 5/8” wall, 71-1/2” or 77-1/2” track, integral spindles,
28-spline camshafts and Meritor MA212 brake lining. Axles have Cam-Master “Q+” quick-change brakes with 5.5” auto slacks.

18. HUB & DRUM Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.

19. BRAKES 16-1/2” X 7” complying with FMVSS 121. Meritor/Wabco 4 sensor, 2 modulator with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5

20. OIL SEALS Stemco Guardian

21. WHEELS Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.

22. TIRES Eight (8) 11R24.5 Bridgestone R195F radials. ½” Black heavy-duty rubber mudflaps, 24”W x 30”L.

23. TARP 18 oz. Shur-lok roll tarp with rear mounted crank. Three molded black plastic sidewall protectors.

24. TARP BOWS Four (4) - 9” rise galvanized steel arch type.

25. PAINT COLORS Black acrylic enamel on all steel parts.

©Timpte, Inc 2004